 |
BMW E39 Front Bumper Replacement |
Unclip and remove the wheel arch liners or the wing splashguards from both sides as shown in pic 1. to reveal the side bolts for the front bumper. The bumper is attached at the front by screws hidden under the bumper grille section as shown in pic 2
The expansion rivets need to be levered out to remove the bumper grille section. The front bumper should pull off towards the front once all screws have been taken off. Take extra care to disconnect the wiring, piping etc. for fog lights and headlight washer nozzles before completely pulling the bumper off.
Please check our
BMW BODY PANELS
section, BMW BODY KITS, and our
BMW STYLING LIGHTS section.
This entry was posted on Tuesday, August 21st, 2007 and is filed under BMW DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
Leave a comment